Basejumper.com - archive

General BASE

Shortcut
Elevators
     I was at a local A last night and I was feeling rather lazy. I took a peek at the elevator and it looked fairly simple to operate. It had some on/off pull switches and up and down buttons. I pulled and pushed all of the buttons and knobs in every different conceivable order but I could not get the elevator to power up. I also checked the numerous boxes outside of the elevator and could not find a master power supply. I am just looking for some input from anyone who knows how to make the magic startSmile
thanks in advance
Mish
Shortcut
Re: [mischo] Elevators
I'd check with any local jumpers first to see if they have any tower-specific beta for that 'vator. If there are none, PM me.
mh
Shortcut
Re: [mischo] Elevators
If you are in Va beach, then is this tower in NC? If so please contact me.

base515

Ps For any who are interested. I have attained the Instruction/Maintenance Manual for Marshall Tower elevators. Along with all blueprints and technical bulletins associated with same. I'm trying to figure a cost effective way to copy and make available to others. Any brothers have access to large copiers?
Shortcut
Re: [base515] Elevators
Oh yes my friend. I have prints copied in our office. I'll see what the copy kid takes for bribes and post back soon.

Mike
Shortcut
Re: [base515] Elevators
How many pages are we talking? There is a local copy shop that handles large format stuff, but they are not cheap...

Ganja
Shortcut
Re: [pullhigh] Elevators
It's about 200 pages or so. 8.5x11" I'm going to scan it in to my computer and then hopefully get it converted to PDF fromat and either post it or send it out on CDs where by it can be printed at will. There are also seven blueprints that are 21x17" that I'll have to figure a way of copying . Either in sections or on a lagre copier. I'll let people know when I get it available.
Thanx\
Mike
Shortcut
Re: [base515] Elevators
Get the 21x17 stuff to me, and I'll handle the copies. A shmae you were a puss last night, I could have gotten them then. It was wild seeing Tony scared to death like that on top of "the" B.

Ganja
Shortcut
Re: [pullhigh] Elevators
I love the way you sweet talk me. I was tired from the boogie, where were you at again????SlyLaugh
Shortcut
Re: [base515] Elevators
In reply to:
It's about 200 pages or so. 8.5x11" I'm going to scan it in to my computer and then hopefully get it converted to PDF fromat and either post it or send it out on CDs where by it can be printed at will. There are also seven blueprints that are 21x17" that I'll have to figure a way of copying . Either in sections or on a lagre copier. I'll let people know when I get it available.



Update please!!Smile
Shortcut
Re: [rfarris] Elevators
 
The most important elevator tip is to send it back down before you jump.

And don’t get greedy as they’ll hold only so many . . .

We tried five (two inside and three on top) and that’s too many . . . !

NicK Smile
BASE 194
Shortcut
Re: [rfarris] Elevators
I should be done by the end of the weekend. I have 3/4ths of it scanned.

Mike

They DO make a lot of noise with 5 on thereSly
Shortcut
Re: [base515] Elevators
Happy 5/15 dude,
don't forget about me when your running off copies.

Thanks 570
Shortcut
Re: [base570] Elevators
The manual has been converted to PDF format(thanks Riggersam!) It comes in at 4.5mbs, so I can easily e-mail it out if you have room in your mailbox. Contact me at base515@carolina.rr.com

Mike
Shortcut
Re: [base515] Elevators
No problem. Thanks for doing all the scanning!

Mark